Capelle aan den IJssel

Capacity Zwijnenburg IJsseldijk Capelle aan den IJssel

A surface area approximately 29,000 m2 with an finishing quay of 200 meters and a large outdoor area with tower crane.

Data finishing hangar with ramp: 21,75m x 140m (7.925m2), lifting capacity of 3x 10 tonnes , height measured in the hook of 18.5 m, this hangar have a ramp that works with rails and carts (instead of slides).

Data sectional construction hangar: 20m x 125m (5.290m2), two lifting capacities of 2x 20 tons (total lifting capacity 80 tons), one upper cat with 2x 10 tons, two overhead cranes with 16 tons, height of the hook measured 13, 5m and have partially concrete floor. There are two large steel construction burries of ca.18 x 12m. The current door width is 12,30m. The door can still be expanded to 19m. For this we have made technical drawings and calculations.

Preprocessing shed next to sectional construction hangar is 14m x 125m. This shed has several overhead cranes to 5 tonnes.

The tower crane has a lifting capacity of 80 tons. It can lift sections on the ramp or pontoon from the sectional construction hangar. Height of the hook measured 29m (depending on position on the ramp or the tide). We can also lift heavier sections outwards away from the sectional construction hangar. Then from the waterfront a floating crane can take it away.